DTC C1626: Steering Angle Sensor Failure [08/2014 - ]: Procedure

1. Replace the spiral cable with sensor sub-assembly with a new or known good one. Refer to REMOVAL [08/2014 - ] .

NEXT: Go to next step 

1. Clear the DTCs. Refer to DTC CHECK / CLEAR [08/2014 - ] .
2. Recheck for DTCs and check that no DTCs are output. Refer to DTC CHECK / CLEAR [08/2014 - ] .

   Result

   Result	Proceed to
   DTC C1626 is output	A
   DTC C1626 is not output	B

B → END 

A → See step   3