DTC P0630: VIN not Programmed or Mismatch - ECM / PCM [09/2014 - 10/2015]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs.

   Result

   Result	Proceed to
   DTC P0630 is output	A
   DTC P0630 and other DTCs are output	B

   NOTE:

   If P0630 is set, the VIN must be input to the ECM using the Techstream. However, all DTCs are cleared automatically by the Techstream when inputting the VIN. If DTCs other than P0630 are set, check them first.

   HINT: 

   If any DTCs other than P0630 are output, troubleshoot those DTCs first.

Result: 

B 

GO TO DTC CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] )

Result: 

A 

See step  2

1. Input the VIN (Refer to REGISTRATION [09/2014 - 10/2015] ).

Result: 

NEXT 

END