DTC P0705: Transmission Range Sensor Circuit Malfunction (PRNDL Input) [09/2014 - 10/2015]: Description
The park/neutral position switch detects the shift lever position and sends signals to the ECM.
HINT:
| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0705 |
One of the following conditions 1, 2 or 3 is met (2 trip detection logic):
- One of the following conditions (a), (b) or (c) is met for 2 seconds or more:
- Any 2 or more of the following signals are ON simultaneously:
- P input signal
- R input signal
- D input signal
- Any 2 or more of the following signals are ON simultaneously:
- N input signal
- R input signal
- D input signal
- Any 2 or more of the following signals are ON simultaneously:
- NSW input signal
- R input signal
- D input signal
- Any of the following conditions is met for 2 seconds or more when the shift lever is in M:
- NSW input signal is ON
- P input signal is ON
- N input signal is ON
- R input signal is ON
- All switches are off simultaneously for NSW, P, R, N and D for 1 minute or more.
|
- Open or short in park/neutral position switch circuit
- Park/neutral position switch Assembly
- Open or short in transmission control switch circuit
- Transmission floor shift assembly
- ECM
|