DTC P3011-123: Battery Block 1 Becomes Weak; DTC P3012-123: Battery Block 2 Becomes Weak; DTC P3013-123: Battery Block 3 Becomes Weak; DTC P3014-123: Battery Block 4 Becomes Weak; DTC P3015-123: Battery Block 5 Becomes Weak; DTC P3016-123: Battery Block 6 Becomes Weak; DTC P3017-123: Battery Block 7 Becomes Weak; DTC P3018-123: Battery Block 8 Becomes Weak; DTC P3019-123: Battery Block 9 Becomes Weak; DTC P3020-123: Battery Block 10 Becomes Weak; DTC P3021-123: Battery Block 11 Becomes Weak; DTC P3022-123: Battery Block 12 Becomes Weak; DTC P3023-123: Battery Block 13 Becomes Weak; DTC P3024-123: Battery Block 14 Becomes Weak; DTC P3025-123: Battery Block 15 Becomes Weak; DTC P3026-123: Battery Block 16 Becomes Weak; DTC P3027-123: Battery Block 17 Becomes Weak; DTC P3028-123: Battery Block 18 Becomes Weak; DTC P3029-123: Battery Block 19 Becomes Weak; DTC P302F-123: Battery Block 20 Becomes Weak [09/2014 - 10/2015]: Description
- Refer to the Description for DTC P0A80-123 (See service information). Refer to DESCRIPTION ).
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| P3011 P3012 P3013 |
123 | Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection). |
|
| P3014 | 123 | Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection). |
|
| P3015 P3016 P3017 P3018 P3019 P3020 P3021 P3022 P3023 P3024 P3025 P3026 P3027 P3028 P3029 P302F |
123 | Presence of a malfunctioning block is determined based on each battery block voltage (1 trip detection). |
|
HINT:
- P3011-123 to P302F-123 will not be set unless the vehicle is driven for approximately 10 minutes after clearing the DTCs.
- In order to ensure HV battery performance, appropriate cooling performance must be maintained. Perform the following items as necessary. If cooling performance has decreased and "Maintenance required for hybrid battery cooling parts at your dealer" is displayed on the multi-information display, make sure to perform the following items:
- Make sure the air intake port is not blocked.
- Make sure there are no gaps between the connecting parts of the ducts.
- Clean the filter of the No. 1 or No. 6 hybrid battery intake duct.
- Clear the DTCs to reset the learning values even if no DTCs are stored.