LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Audio / Video System (W/ Navigation) (Diagnostic Codes & Symptom Tests) >> AUDIO AND VISUAL SYSTEM (w/ Navigation System) >> Symptom Tests >> Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier [08/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sound Signal Circuit between Navigation Receiver Assembly and Stereo Component Amplifier [08/2013 - ]: Procedure

  1. CHECK HARNESS AND CONNECTOR (MOST COMMUNICATION LINE CIRCUIT) 
    1. Disconnect the H18 multi-media module receiver assembly connector.
    2. for 9 Speakers
      1. Disconnect the H23 stereo component amplifier assembly connector.
    3. for 17 Speakers
      1. Disconnect the R32 stereo component amplifier assembly connector.
    4. w/ Rear Seat Entertainment System
      1. Disconnect the H35 multi-display controller sub-assembly connector.
    5. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      for 9 Speakers 

      for 17 Speakers (w/o Rear Seat Entertainment System) 

      for 17 Speakers (w/ Rear Seat Entertainment System) 

      Tester Connection Condition Specified Condition
      H18-2 (MI+) - H23-5 (MO+) Always Below 1 Ω
      H18-3 (MI-) - H23-6 (MO-) Always Below 1 Ω
      H18-4 (SLDI) - H23-7 (SLDO) Always Below 1 Ω
      H18-5 (MO+) - H23-2 (MI+) Always Below 1 Ω
      H18-6 (MO-) - H23-3 (MI-) Always Below 1 Ω
      H18-7 (SLDO) - H23-4 (SLDI) Always Below 1 Ω
      H18-2 (MI+) - Body ground Always 10 kΩ or higher
      H18-3 (MI-) - Body ground Always 10 kΩ or higher
      H18-4 (SLDI) - Body ground Always 10 kΩ or higher
      H18-5 (MO+) - Body ground Always 10 kΩ or higher
      H18-6 (MO-) - Body ground Always 10 kΩ or higher
      H18-7 (SLDO) - Body ground Always 10 kΩ or higher
      Tester Connection Condition Specified Condition
      H18-2 (MI+) - R32-5 (MO+) Always Below 1 Ω
      H18-3 (MI-) - R32-6 (MO-) Always Below 1 Ω
      H18-4 (SLDI) - R32-7 (SLDO) Always Below 1 Ω
      H18-5 (MO+) - H23-2 (MI+) Always Below 1 Ω
      H18-6 (MO-) - H23-3 (MI-) Always Below 1 Ω
      H18-7 (SLDO) - H23-4 (SLDI) Always Below 1 Ω
      H18-2 (MI+) - Body ground Always 10 kΩ or higher
      H18-3 (MI-) - Body ground Always 10 kΩ or higher
      H18-4 (SLDI) - Body ground Always 10 kΩ or higher
      H18-5 (MO+) - Body ground Always 10 kΩ or higher
      H18-6 (MO-) - Body ground Always 10 kΩ or higher
      H18-7 (SLDO) - Body ground Always 10 kΩ or higher
      Tester Connection Condition Specified Condition
      H18-2 (MI+) - H35-5 (MO+) Always Below 1 Ω
      H18-3 (MI-) - H35-6 (MO-) Always Below 1 Ω
      H18-4 (SLDI) - H35-7 (SLDO) Always Below 1 Ω
      H35-2 (MI+) - R32-5 (MO+) Always Below 1 Ω
      H35-3 (MI-) - R32-6 (MO-) Always Below 1 Ω
      H35-4 (SLDI) - R32-7 (SLDO) Always Below 1 Ω
      H35-8 (WUI) - R32-1 (WUO) Always Below 1 Ω
      H18-5 (MO+) - H23-2 (MI+) Always Below 1 Ω
      H18-6 (MO-) - H23-3 (MI-) Always Below 1 Ω
      H18-7 (SLDO) - H23-4 (SLDI) Always Below 1 Ω
      H35-2 (MI+) - Body ground Always 10 kΩ or higher
      H35-3 (MI-) - Body ground Always 10 kΩ or higher
      H35-4 (SLDI) - Body ground Always 10 kΩ or higher
      H18-5 (MO+) - Body ground Always 10 kΩ or higher
      H18-6 (MO-) - Body ground Always 10 kΩ or higher
      H18-7 (SLDO) - Body ground Always 10 kΩ or higher
      H35-8 (WUI) - Body ground Always 10 kΩ or higher
      H18-5 (MO+) - Body ground Always 10 kΩ or higher
      H18-6 (MO-) - Body ground Always 10 kΩ or higher
      H18-7 (SLDO) - Body ground Always 10 kΩ or higher

    NG → REPAIR OR REPLACE HARNESS OR CONNECTOR 

    OK → See step   2 

  2. PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [08/2013 - ]