DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Engine ECU Communication; DTC U0126: Steering Sensor Communication; DTC U0129: VSC(ECB)ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U0164: Air Conditioner ECU Communication; DTC U0198: Lost Communication with Telematic Control Module; DTC U1110: Clearance Sonar ECU Communication [08/2013 - ]: Procedure
- CLEAR DTC
- Clear the DTCs. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ] .
NEXT: Go to next step
- CHECK CAN COMMUNICATION SYSTEM
- Recheck for DTCs and check if the same DTCs are output again. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]
.
OK
No DTCs are output.
NG → See step 4
OK → See step 3
- Recheck for DTCs and check if the same DTCs are output again. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]
.
- USE SIMULATION METHOD TO CHECK. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]
- GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2013 - ]