LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> IS 250 Base, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Variable Gear Ratio Steering System - Diagnostics - Introduction >> Variable Gear Ratio Steering System >> Diagnosis System [04/2013 - 10/2016] >> Diagnosis System [04/2013 - 10/2016]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis System [04/2013 - 10/2016]

  1. FUNCTION OF WARNING LIGHT AND MESSAGE 
    1. If a malfunction occurs during system operation, the master warning light in the combination meter comes on and "Check VGRS System" is displayed on the multi-information display to inform the driver of the system malfunction.
  2. DTC 
    1. Normal mode.
      1. DTCs are stored in the VGRS ECU (front steering control ECU) and output using the Techstream.

        Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

    2. Test mode.
      1. By switching from normal mode to test mode, the steering sensor and steering actuator assembly can be inspected.

        Refer to TEST MODE PROCEDURE [04/2013 - 10/2016] 

        HINT: 

        Whether the system is in normal mode or test mode can be checked from the indication on the multi-information display. For details of the indication and how to check, refer to DTC Check/Clear.

        Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

  3. CHECK DLC3 
    1. Check the DLC3.

      Refer to GENERAL INFORMATION [04/2013 - ]

scientia non olet · About LEMON Manuals