How To Proceed With Troubleshooting [04/2013 - 10/2016]: Procedure

Result

Result: 

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [04/2013 - 06/2014] , or refer to DIAGNOSIS SYSTEM [06/2014 - 08/2015] , or refer to DIAGNOSIS SYSTEM [08/2015 - 10/2016]

   Result

   Result	Proceed to
   CAN DTCs are not output.	A
   CAN DTCs are output.	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [04/2013 - 10/2016] 

Result: 

A 

See step  4

1. Check for DTCs.

   Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

   Chassis > VGRS > Trouble Codes 

2. Clear the DTCs.

   Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

   Chassis > VGRS > Clear DTCs 

3. Recheck for DTCs.

   Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

   Chassis > VGRS > Trouble Codes 

   1. Simulate the malfunction and check if the DTCs are output again.

      Refer to DTC CHECK / CLEAR [04/2013 - 10/2016] 

   Result

   Result	Proceed to
   DTCs are not output.	A
   DTCs are output.	B
   DTCs are not output, and the malfunction cannot be simulated or checked	C

Result: 

B 

See step  9

Result: 

C 

SYMPTOM SIMULATION 

Result: 

A 

See step  5

Result

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END 

Result

Result: 

NEXT 

See step  10

Result

Result: 

NEXT 

See step  11

Result

Result: 

NEXT 

END