LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> IS 250 Base, RWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Automatic Headlight Beam Level Control System - Diagnostics - Introduction >> Automatic Headlight Beam Level Control System >> Problem Symptoms Table [10/2016 - 09/2020] >> Problem Symptoms Table [10/2016 - 09/2020]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Problem Symptoms Table [10/2016 - 09/2020]

NOTE:

If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.

Refer to INITIALIZATION [10/2016 - 09/2020] 

HINT: 

AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM

Symptom Suspected Area Link
Automatic headlight beam level control system does not operate (Left Headlight) Headlight beam level control actuator circuit Refer to Headlight Beam Level Control Actuator Circuit [10/2016 - 09/2020]
No. 1 Headlight ECU sub-assembly LH Refer to REMOVAL [10/2016 - 09/2020]
Automatic headlight beam level control system does not operate (Right Headlight) Headlight beam level control actuator circuit Refer to Headlight Beam Level Control Actuator Circuit [10/2016 - 09/2020]
No. 1 Headlight ECU sub-assembly RH Refer to REMOVAL [10/2016 - 09/2020]
Initialization cannot be performed CAN communication system Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2016 - 09/2018] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - ]
No. 1 Headlight ECU sub-assembly LH Refer to REMOVAL [10/2016 - 09/2020]