LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> IS 250 Base, RWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Window Control System - Diagnostics - Introduction >> Power Window Control System >> Customize Parameters [04/2013 - ] >> Customize Parameters [04/2013 - ]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters [04/2013 - ]

  1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make notes of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Power Window.
      5. Select the setting by referring to the table below.

        Power Window 

        Tester Display Description Default Setting ECU
        Door Key P/W Up This function is used to close the windows by operating the mechanical key. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        Door Key P/W Down This function is used to open the windows by operating the mechanical key. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        P/W Down W/ Transmit This function is used to open the windows using the wireless key transmitter. OFF 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
        P Window Auto Up This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly. Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Front Passenger Door)
        P Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Front Passenger Door)
        RR Window Auto Up This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for RH door). Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Rear RH Door)
        RR Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Rear RH Door)
        RL Window Auto Up This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for LH door). Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Rear LH Door)
        RL Window Auto Up From Driver This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. Avail 0:Not Avl, 1:Avail Power window regulator motor assembly (for Rear LH Door)
      6. Enter the following menus: Customize Setting / Wireless Door Lock.
      7. Select the setting by referring to the table below.

        Wireless Door Lock 

        Tester Display Description Default Setting ECU
        P/W Wireless Ope Buzz This function turns the wireless power window buzzer response on or off. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
      8. Enter the following menus: Customize Setting / Security.
      9. Select the setting by referring to the table below.

        Security 

        Tester Display Description Default Setting ECU
        Window Open Warning This function is used to enable or disable the window open warning. ON 0:OFF, 1:ON Main body ECU (Multiplex network body ECU)
scientia non olet · About LEMON Manuals