Typical Enabling Conditions

ALL 

1. Battery voltage	8 V or more
   Engine switch	on (IG)
   Starter	OFF

P0712: Range check 

1. The monitor will run whenever these DTCs are not present.

   None

P0713: Range check 

1. One of the following conditions is met: Condition (A) or (B)
   CONDITION (A)
   
   

   The monitor will run whenever these DTCs are not present. (Not circuit malfunction)	P0115, P0117, P0118 (ECT sensor circuit fail) P00AC, P00AD, P0110, P0112, P0113 (IAT sensor circuit fail)
   Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	-29.375°C (-20.875°F) or less
   Time after engine start	2GR-FSE: 295 seconds or more 4GR-FSE: 297 seconds or more
   ECT (Engine coolant temperature) sensor circuit	Not detected
   IAT (Intake air temperature) sensor circuit	Not detected

   CONDITION (B)
   
   

   The monitor will run whenever these DTCs are not present. (Not circuit malfunction)	P0115, P0117, P0118 (ECT sensor circuit fail) P00AC, P00AD, P0110, P0112, P0113 (IAT sensor circuit fail)
   Engine coolant temperature (ECT) or intake air temperature (IAT) at engine start	More than -29.375°C (-20.875°F)
   Time after engine start	10 seconds or more
   ECT (Engine coolant temperature) sensor circuit	Not detected
   IAT (Intake air temperature) sensor circuit	Not detected