DTC C15C3/75: Brake System Control Module Malfunction [10/2014 - ]: Procedure
- CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
- Check for DTCs in the skid control ECU. Refer to DTC CHECK / CLEAR [10/2014 - ]
.
Result
Result Proceed to DTC is not output OK DTC is output NG
NG → REPAIR CIRCUIT INDICATED BY DTC OUTPUT
OK: Go to next step
- Check for DTCs in the skid control ECU. Refer to DTC CHECK / CLEAR [10/2014 - ]
.
- CHECK DTC (CAN COMMUNICATION SYSTEM)
- Check for DTCs in the CAN communication system. Refer to DIAGNOSIS SYSTEM [10/2014 - ]
.
Result
Result Proceed to DTC is not output A DTC is output B
B → REPAIR CIRCUIT INDICATED BY DTC OUTPUT
A → See step 3
- Check for DTCs in the CAN communication system. Refer to DIAGNOSIS SYSTEM [10/2014 - ]
.
- REPLACE STEERING CONTROL ECU. Refer to REMOVAL [10/2014 - ]