LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GS 200t Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Fuel System - Service Information) >> Fuel Pressure Sensor >> Installation [09/2014 - 10/2015] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation [09/2014 - 10/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus GS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY (FUEL PRESSURE SENSOR) 

    (Refer to INSTALLATION [09/2014 - 10/2015] )

    NOTE:
    • Do not remove the fuel pressure sensor from the fuel delivery pipe sub-assembly.
    • If a fuel pressure sensor is removed, replace the fuel delivery pipe sub-assembly (fuel pressure sensor) with a new one.
scientia non olet · About LEMON Manuals