LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GS 450h Base >> Repair and Diagnosis (Single Page) >> Electrical >> Starter >> Smart Access System With Push-Button Start (For Start Function) (Diagnostic Codes & Symptom Tests) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> Symptom Tests >> Power Source Mode does not Change to ON (IG) [09/2014 - 10/2015] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Source Mode does not Change to ON (IG) [09/2014 - 10/2015]: Description

If the power switch is pressed with the electrical key transmitter sub-assembly in the cabin, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode.

HINT: 

When the cable is disconnected and reconnected to the negative (-) auxiliary battery terminal, the power source mode returns to the state it was in before the cable was disconnected.

RELATED DATA LIST AND ACTIVE TEST ITEMS

Problem Symptom Data List Item Active Test Item
Power source mode does not change to on (IG) but does change to on (ACC) Power Source Control 
  • Power Supply Condition
  • IG1 Relay Monitor (Inside)
  • IG2 Relay Monitor (Inside)
  • IG1 Relay Monitor (Outside)
  • IG2 Relay Monitor (Outside)
  • IG1 Circuit
  • IG2 Circuit
 -
scientia non olet · About LEMON Manuals