DTC C1AC2: Slave Module Horizontal Axis Misalignment [08/2015 - 08/2016]: Description
This DTC is stored when the angle of the blind spot monitor sensor RH deviates more than the allowable range from the horizontal axis.
HINT:
If drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor main switch (multi-function switch) on, the blind spot monitor system may store this DTC by mistake.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AC2 | When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is activated. | Blind spot monitor sensor RH |