LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Wide View Front Monitor System (Diagnostics - Introduction) >> Wide View Front Monitor System >> DTC Check / Clear [08/2015 - 08/2019] >> DTC Check / Clear [08/2015 - 08/2019]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [08/2015 - 08/2019]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.
    5. Check the details of the DTCs (Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2019] ).

      HINT: 

      The parking assist ECU may store the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

      System Proceed to
      Parking Assist Monitor System Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2019]
      Side Monitor System Refer to DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2019]
  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Parking Assist Monitor System / Trouble Codes.
    5. According to the display on the Techstream, select the trouble code data display with the clear button.
scientia non olet · About LEMON Manuals