LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> GX 460 Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Power Window Control System (Diagnostic Codes & Symptom Tests) >> Power Window Control System >> Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [08/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch [08/2015 - ]: Procedure

  1. CHECK FOR DTC 
    1. Clear the DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
    2. Check for DTCs (Refer to DTC CHECK / CLEAR [08/2015 - ] ).
      RESULT

      Result Proceed to
      DTC is not output A
      DTC B2311 is output B
      DTC B2312 is output C
      DTC B2313 is output D
      LIN communication system DTCs are output E

    Result: 

    GO TO DTC B2311 

    (Refer to DTC B2311: Power Window Motor Malfunction [08/2015 - ] )

    Result: 

    GO TO DTC B2312 

    (Refer to DTC B2312: Power Window Switch Malfunction [08/2015 - ] )

    Result: 

    GO TO DTC B2313 

    (Refer to DTC B2313: Glass Position Initialization Incomplete [08/2015 - ] )

    Result: 

    GO TO LIN COMMUNICATION SYSTEM 

    (Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ] )

    Result: 

    See step  2

  2. CHECK MANUAL UP/DOWN FUNCTION 
    1. Check that the front power window moves when the manual up/down function of the multiplex network master switch is operated (Refer to OPERATION CHECK [08/2015 - 08/2016] , or refer to OPERATION CHECK [08/2016 - ] ).

      OK

      Front power window moves.

    Result: 

    NG 

    GO TO "Driver Side Power Window does not Operate with Power Window Master Switch" 

    (Refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2015 - 08/2019] , or refer to Driver Side Power Window does not Operate with Power Window Master Switch [08/2019 - ] )

    Result: 

    OK 

    See step  3

  3. READ VALUE USING TECHSTREAM (MULTIPLEX NETWORK MASTER SWITCH) 
    1. Use the Data List to check if the multiplex network master switch is functioning properly (Refer to DATA LIST / ACTIVE TEST [08/2015 - ] ).
      MASTER SWITCH

      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D Door P/W Auto SW Driver side power window auto up/down signal / ON or OFF ON: Driver side power window auto up/down switch on power window regulator master switch operated
      OFF: Driver side power window auto up/down switch on power window regulator master switch not operated
      -

      OK

      On tester screen, item changes between ON and OFF according to above chart.

    Result: 

    OK 

    REPLACE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH 

    (Refer to REMOVAL [08/2015 - ] )

    Result: 

    NG 

    REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY 

    (Refer to REMOVAL [08/2015 - 08/2019] , or refer to REMOVAL [08/2019 - ] )