DTC U0073: Control Module Communication Bus OFF; DTC U0100: Lost Communication with ECM / PCM; DTC U0114: Lost Communication with 4WD Control ECU; DTC U0123: Lost Communication with Yaw Rate Sensor Module; DTC U0124: Lost Communication with Lateral Acceleration Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module [08/2015 - 08/2019]: Procedure
- RECONFIRM DTC
- Clear the DTC(s) (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).
- Check if the same DTC(s) is output (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019]
).RESULT
Result Proceed to DTC is not output A DTC is output B
Result:
A
USE SIMULATION METHOD TO CHECK
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] )
Result:
B
GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)
(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2019] )