DTC B1788: Rear Occupant Classification Sensor RH Collision Detection [08/2015 - 08/2019]: Description

DTC B1788 is stored when the occupant classification ECU receives a collision detection signal, which is sent by the rear occupant classification sensor RH when an accident occurs.

DTC B1788 is also stored when the separate type front seat cushion spring RH is subjected to a strong impact, even if an actual accident has not occurred.

However, when the occupant classification ECU outputs a collision detection signal, even if the vehicle has not been in a collision, DTC B1788 can be cleared by conducting the zero point calibration and sensitivity check.

Therefore, if DTC B1788 is output, first perform the zero point calibration and sensitivity check.

HINT: 

• When DTC B1650/32 is stored as a result of troubleshooting the airbag system, perform troubleshooting for DTC B1788 of the occupant classification system.
• Use the Techstream to check for DTCs of the occupant classification ECU, otherwise the DTCs cannot be read.