DTC C1ABB: Blind Spot Monitor Master Module Beam Axis Inspection Incomplete [09/2020 - ]: Procedure

1. Perform the Blind Spot Monitor Beam Axis Adjustment using the GTS.

   Body Electrical > Blind Spot Monitor Master > Utility 

   Tester Display
   BSM Master Beam Axis Adjustment

   HINT: 

   Refer to Blind Spot Monitor Beam Axis Confirmation.

   Refer to OPERATION CHECK [09/2020 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END