Utility [09/2020 - ]

HINT: 

Recognition Camera/Target Position Memory is used to enter required information into the forward recognition camera.

1. Perform Recognition Camera/Target Position Memory according to the display on the Techstream.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera/Target Position Memory

   HINT: 

   For forward recognition camera adjustment procedures.

   Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

   One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [11/2021 - ]

   Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [11/2021 - ]

HINT: 

Recognition Camera Axis Adjust is used to calibrate the internal data of the forward recognition camera to enhance its recognition accuracy.

1. Perform Recognition Camera Axis Adjust according to the display on the Techstream.

   for Type A:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera Axis Adjust

   for Type B:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Recognition Camera Axis Adjust

   HINT: 

   For forward recognition camera adjustment procedures.

   Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

   One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [11/2021 - ]

   Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [11/2021 - ]

HINT: 

This utility is used to display the initial axis adjust value display stored in the forward recognition camera.

1. Following the instructions on the Techstream, perform "Initial Axis Adjust Value Display".

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Initial Axis Adjust Value Display

HINT: 

This utility is used to check the front recognition camera axis misalignment reading calculated by the forward recognition camera.

1. Following the instructions on the Techstream, perform "Front Recognition Camera Axis Misalignment Reading".

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Front Recognition Camera Axis Misalignment Reading

1. Following the instructions on the Techstream, perform "Transition to Online Axis Alignment Mode".

   for Type A:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Transition to Online Axis Alignment Mode

   for Type B:

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   Transition to Online Axis Alignment Mode

HINT: 

PCS Image Information Clear is used to clear the PCS Image Information data.

1. Perform PCS Image Information Clear according to the display on the Techstream.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   PCS Image Information Clear

HINT: 

PCS Image Record Setting is used to activate/deactivate the PCS image recording function.

1. Perform PCS Image Record Setting according to the display on the Techstream.

   Chassis > Front Recognition Camera > Utility 

   Tester Display
   PCS Image Record Setting