LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2016 >> LX 570 >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Forward Recognition Camera System (Diagnostic Codes & Circuit Tests) >> Forward Recognition Camera System >> DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0101: Lost Communication with TCM; DTC U0123: Lost Communication with Yaw Rate Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B" [09/2015 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0100: Lost Communication with ECM / PCM "A"; DTC U0101: Lost Communication with TCM; DTC U0123: Lost Communication with Yaw Rate Sensor Module; DTC U0129: Lost Communication with Brake System Control Module; DTC U0142: Lost Communication with Body Control Module "B" [09/2015 - ]: Description

These DTCs are output when a communication malfunction occurs between the sensors and ECUs.

DTC No. DTC Detection Condition Trouble Area
U0100 While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the ECM and the forward recognition camera is detected for 5 seconds or more.
  • CAN communication system
  • ECM
  • Forward recognition camera
U0101 While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the TCM and the forward recognition camera is detected for 5 seconds or more.
  • CAN communication system
  • TCM
  • Forward recognition camera
U0123 While the vehicle is being driven at 1 km/h (1 mph) or more, a communication error between the yaw rate sensor and the forward recognition camera is detected for 5 seconds or more.
  • CAN communication system
  • Yaw rate and acceleration sensor (Airbag sensor assembly)
  • Forward recognition camera
U0129 2 seconds after the engine switch is turned on (IG), a communication error between the skid control ECU (master cylinder solenoid) and the forward recognition camera is detected for 5 seconds or more.
  • CAN communication system
  • Skid control ECU (Master cylinder solenoid)
  • Forward recognition camera
U0142 2 seconds after the engine switch is turned on (IG), a communication error between the main body ECU (multiplex network body ECU) and the forward recognition camera is detected for 5 seconds or more.
  • CAN communication system
  • Main body ECU (multiplex network body ECU)
  • Forward recognition camera
scientia non olet · About LEMON Manuals