DTC U0073: Sending Malfunction (Navigation to APGS); DTC U0100: Engine ECU Communication; DTC U0126: Steering Sensor Communication; DTC U0129: VSC(ECB)ECU Communication; DTC U0140: Lost Communication with Body Control Module; DTC U0155: Meter ECU Communication; DTC U1110: Clearance Sonar ECU Communication [09/2014 - ]: Procedure
- CLEAR DTC
- Clear the DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] Refer to DTC CHECK / CLEAR [10/2015 - ] ).
Result: NEXT
NEXT
See step 2
- CHECK CAN COMMUNICATION SYSTEM
- Use the Techstream to check if the CAN communication system is functioning normally (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015]
Refer to DTC CHECK / CLEAR [10/2015 - ]
).
OK
CAN communication system DTCs are not output.
Result: OK
OK
USE SIMULATION METHOD TO CHECK
(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
Result: NG
NG
GO TO CAN COMMUNICATION SYSTEM
(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )
- Use the Techstream to check if the CAN communication system is functioning normally (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015]
Refer to DTC CHECK / CLEAR [10/2015 - ]
).