DTC B2085: Communication Error from Driving Support ECU to VSC ECU [09/2014 - 10/2015]: Procedure

1. Select "Bus Check" from the "System Select" (See page. Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] ).
2. Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".

   OK

   CAN communication system DTC is not output.

Result:  NG

NG 

GO TO CAN COMMUNICATION SYSTEM 

(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] )

Result:  OK

OK 

See step  2

1. Clear the DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
2. Check for DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).

   OK

   DTC B2085 is not output.

Result:  OK

OK 

USE SIMULATION METHOD TO CHECK 

(See page. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] )

Result:  NG

NG 

REPLACE SEAT BELT CONTROL ECU 

(See page. Refer to REMOVAL [09/2014 - 10/2015] )