DTC C1A30: Driver Monitor ECU [09/2014 - 10/2015]: Procedure

REPLACE DRIVER MONITOR ECU
1. Replace the driver monitor ECU with a new one (See page. Refer to REMOVAL [09/2014 - 10/2015] ).
Result: NEXT

NEXT

See step 2
CHECK FOR DTC (PRE-COLLISION SYSTEM)
1. Clear the DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
2. Check for DTCs (See page. Refer to DTC CHECK / CLEAR [09/2014 - 10/2015] ).
  OK
  
  DTC C1A30 is not output.
Result: OK

OK

END (DRIVER MONITOR ECU WAS DEFECTIVE)

Result: NG

NG

REPLACE DRIVING SUPPORT ECU

(See page. Refer to REMOVAL [09/2014 - 10/2015] )