Caution / Notice / Hint

NOTE:

When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
When the forward recognition camera is replaced with a new one or the windshield glass is replaced or removed/installed, make sure to read Before Starting Adjustment, then perform optical axis alignment for the forward recognition camera and clear the vehicle control history for each system.
HINT:

Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.

One Time Recognition: Refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(ONE TIME RECOGNITION) [11/2021 - ]

Sequential Recognition: Refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [09/2020 - 11/2021] , or refer to TARGET ADJUSTMENT(SEQUENTIAL RECOGNITION) [11/2021 - ]

Driving Adjustment: Refer to DRIVING ADJUSTMENT [09/2020 - ]