Caution / Notice / Hint
NOTE:
- If the No. 1 headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the No. 1 headlight ECU sub-assembly LH.
Refer to INITIALIZATION [10/2016 - 09/2020]
- If any of the following are performed, it is necessary to initialize the No. 1 headlight ECU sub-assembly LH.
Refer to INITIALIZATION [10/2016 - 09/2020]
- Replacement of the rear height control sensor sub-assembly LH
- Removal/installation of the rear height control sensor sub-assembly LH
- Work that changes the vehicle height such as replacement of suspension components