LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Vehicle Stability Control System - Diagnostic Codes (5 Of 5) & Symptom Tests (1 Of 2) >> Vehicle Stability Control System >> DTC U0073: Control Module Communication Bus OFF; DTC U0100: Lost Communication with ECM / PCM; DTC U0123: Lost Communication with Yaw Rate Sensor Module; DTC U0124: Lost Communication with Lateral Acceleration Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0130: Lost Communication with VGRS [08/2015 - 10/2016] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0073: Control Module Communication Bus OFF; DTC U0100: Lost Communication with ECM / PCM; DTC U0123: Lost Communication with Yaw Rate Sensor Module; DTC U0124: Lost Communication with Lateral Acceleration Sensor Module; DTC U0126: Lost Communication with Steering Angle Sensor Module; DTC U0130: Lost Communication with VGRS [08/2015 - 10/2016]: Description

The skid control ECU (brake actuator assembly) receives signals from the ECM, steering angle sensor, yaw rate and acceleration sensor and front steering control ECU via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
U0073 Control Module Communication Bus OFF Any of the following is detected:
  1. A bus OFF state occurs once or more within 0.1 seconds, 10 times in succession. (Sent signals cannot be received.)
  2. When the IG1 terminal voltage is between 10 and 17.4 V, a delay in receiving data from the yaw rate and acceleration sensor, steering angle sensor and front steering control ECU (w/ VGRS system) continues for 1 second or more.
  3. When the IG1 terminal voltage is between 10 and 17.4 V, the following occurs 10 times in succession within 60 seconds:
    • A delay in receiving data from the yaw rate and acceleration sensor, steering angle sensor and front steering control ECU (w/ VGRS system) occurs more than once within 5 seconds.
 CAN communication system
U0100 Lost Communication with ECM / PCM The IG1 terminal voltage is between 10 and 17.4 V and the vehicle speed is 15 km/h (9 mph) or more, data cannot be received from the ECM for 2 seconds or more.
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • ECM
U0123 Lost Communication with Yaw Rate Sensor Module Either of the following is detected:
  1. When the IG1 terminal voltage is between 10 and 17.4 V and the vehicle speed is 7 km/h (4 mph) or more, data from the yaw rate sensor cannot be received for 1 second or more.
  2. When the IG1 terminal voltage is between 10 and 17.4 V, the following occurs 10 times in succession within 60 seconds:
    • Data from the yaw rate sensor cannot be received once or more within 5 seconds.
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • Yaw rate sensor (yaw rate and acceleration sensor)
U0124 Lost Communication with Lateral Acceleration Sensor Module Either of the following is detected:
  1. When the IG1 terminal voltage is between 10 and 17.4 V and the vehicle speed is 7 km/h (4 mph) or more, data from the acceleration sensor cannot be received for 1 second or more.
  2. When the IG1 terminal voltage is between 10 and 17.4 V, the following occurs 10 times in succession within 60 seconds:
    • Data from the acceleration sensor cannot be received once or more within 5 seconds.
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • Acceleration sensor (yaw rate and acceleration sensor)
U0126 Lost Communication with Steering Angle Sensor Module Either of the following is detected:
  1. When the IG1 terminal voltage is between 10 and 17.4 V, data from the steering angle sensor cannot be received for 1 second or more.
  2. When the IG1 terminal voltage is between 10 and 17.4 V, the following occurs 10 times in succession within 60 seconds:
    • Data from the steering angle sensor cannot be received once or more within 5 seconds.
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • Steering angle sensor
U0130 Lost Communication with VGRS Either of the following is detected:
  1. When the IG1 terminal voltage is between 10 and 17.4 V, data from the front steering control ECU cannot be received for 1 second or more.
  2. When the IG1 terminal voltage is between 10 and 17.4 V, the following occurs 10 times in succession within 60 seconds:
    • Data from the front steering control ECU cannot be received once or more within 5 seconds.
  • CAN communication system
  • Skid control ECU (brake actuator assembly)
  • Front steering control ECU
scientia non olet · About LEMON Manuals