LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> IS 350 Base, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Steering Column - Service Information >> Steering Column Assembly >> Reassembly [04/2013 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reassembly [04/2013 - ]: Procedure

  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic Steering Column) 
    1. Install the multiplex tilt and telescopic ECU with the 2 screws.
  2. INSTALL STEERING LOCK ACTUATOR ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column with Steering Lock Actuator Assembly) 

    HINT: 

    When replacing the steering lock actuator assembly, perform initialization.

    Refer to REGISTRATION [04/2013 - 06/2014] , or refer to REGISTRATION [06/2014 - 08/2015] , or refer to REGISTRATION [08/2015 - 10/2017] , or refer to REGISTRATION [10/2017 - 09/2020] , or refer to REGISTRATION [09/2020 - 11/2021] , or refer to REGISTRATION [11/2021 - 09/2022] , or refer to REGISTRATION [09/2022 - ]

    1. Set the steering column assembly in a vise between aluminum plates.
      NOTE:

      Do not overtighten the vise.

    2. Temporarily install the steering lock actuator assembly with a new steering lock set bolt.
      GTY460385Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Tighten the steering lock set bolt until the bolt head breaks off.
  3. INSTALL STEERING LOCK ACTUATOR ASSEMBLY (for Power Tilt and Power Telescopic Steering Column with Steering Lock Actuator Assembly) 

    HINT: 

    When replacing the steering lock actuator assembly, perform initialization.

    Refer to REGISTRATION [04/2013 - 06/2014] , or refer to REGISTRATION [06/2014 - 08/2015] , or refer to REGISTRATION [08/2015 - 10/2017] , or refer to REGISTRATION [10/2017 - 09/2020] , or refer to REGISTRATION [09/2020 - 11/2021] , or refer to REGISTRATION [11/2021 - 09/2022] , or refer to REGISTRATION [09/2022 - ]

    1. Temporarily install the steering lock actuator assembly with 2 new steering lock set bolts.
      GTY460390Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Tighten the 2 steering lock set bolts until the bolt head breaks off.
scientia non olet · About LEMON Manuals