DTC U0073: Control Module Communication Bus Off; DTC U0100: Lost Communication With ECM/PCM "A"; DTC U0126: Lost Communication With Steering Angle Sensor Module; DTC U0129: Lost Communication With Brake System Control Module [09/2020 - ]: Procedure

1. Connect the Techstream to the DLC3.
2. Check for DTCs.

   Refer to DTC CHECK / CLEAR [09/2020 - ]

   Chassis > Four Wheel Drive > Trouble Codes 

3. Record the output DTC (4WD control system).

   HINT: 

   When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before repairing each corresponding sensor or ECU.

   Result

   Proceed to
   NEXT

Result: 

NEXT 

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2018 - ]