DTC C0526-96: Steering Angle Sensor Module Component Internal Failure [05/2019 - ]: Procedure

1. Replace the steering sensor.

   Refer to REMOVAL [10/2014 - ]

   NOTE:

   When replacing the steering sensor, confirm that the replacement part is of the correct specification.

   HINT: 

   If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step.

   Refer to PROBLEM SYMPTOMS TABLE [05/2019 - ]

   Result

   Proceed to
   NEXT

Result: 

NEXT 

END