LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2017 >> NX 200t Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Lane Departure Alert System (W/ Steering Control) - Diagnostics - Introduction >> LANE DEPARTURE ALERT SYSTEM (w/ Steering Control) >> DTC Check / Clear [10/2014 - 09/2017] >> DTC Check / Clear [10/2014 - 09/2017]
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Check / Clear [10/2014 - 09/2017]

  1. CHECK DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Lane Departure Alert / Trouble Codes.
    5. Check for DTCs.

      Refer to DIAGNOSTIC TROUBLE CODE CHART [10/2014 - 09/2017] 

      Chassis > Lane Departure Alert > Trouble Codes 

  2. CLEAR DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Chassis / Lane Departure Alert / Clear DTCs.
    5. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [10/2014 - 09/2017] 

      Chassis > Lane Departure Alert > Clear DTCs 

scientia non olet · About LEMON Manuals