Freeze Frame Data [10/2014 - 09/2017]
- CHECK FREEZE FRAME DATA
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Chassis / Lane Departure Alert / Trouble Codes.
Chassis > Lane Departure Alert > Trouble Codes
- According to the Techstream display, select a DTC that stored freeze frame data.
- Read the freeze frame data recorded when the DTC was stored.
Chassis > Lane Departure Alert
Tester Display Measurement Item Range Normal Condition Diagnostic Note LDA Control Status of the LDA control Prohibit or Permit Prohibit: Control prohibited
Permit: Control permitted- Head Light (High Beam) Status of the headlight (high beam) OFF or ON ON: Headlight dimmer switch HI
OFF: Headlight dimmer switch except HI- Turn Signal Switch (Right) Status of turn signal light switch (right) OFF or ON ON: Turn signal light switch on (right)
OFF: Turn signal light switch off- Turn Signal Switch (Left) Status of turn signal light switch (left) OFF or ON ON: Turn signal light switch on (left)
OFF: Turn signal light switch off- Destination Information Status of the country JPN, NA, EURO, CHINA or OTHER Actual country code - LDA Indicator Status of the lane departure alert indicator light Nothing or Green Nothing: Lane departure alert indicator light is not illuminated
Green: Lane departure alert indicator light is illuminated- Left Lane Indicator Status of left lane indicator Nothing, Heavy, Thin or H blink Nothing: Lane departure alert system deactivated
Heavy: Left lane detected
Thin: Left lane not detected
H blink: Departing from left lane- Right Lane Indicator Status of right lane indicator Nothing, Heavy, Thin or H blink Nothing: Lane departure alert system deactivated
Heavy: Right lane detected
Thin: Right lane not detected
H blink: Departing from left lane- Skid Control Buzzer Demand Status of combination meter assembly demand OFF or ON ON: Combination meter assembly sounds (lane departure warning is being issued)
OFF: Combination meter assembly does not sound (lane departure warning is not being issued)- Vehicle Information (2WD/4WD) Vehicle information 2WD, 4WD or Unknown 2WD: for 2WD
4WD: for AWD
Unknown: Vehicle information not confirmed- Vehicle Information (Conv/HV) Vehicle information Conv, HV or Unknown Conv: Conventional
HV: Hybrid vehicle
Unknown: Vehicle information not confirmed- The Number of DTCs Number of DTCs Min.: 0, Max.: 255 Actual number of DTCs -