| Absorber control actuator |
Changes the damping force. |
| Front acceleration sensor LH |
Detects the vertical acceleration of the left front area of the body. |
| Rear acceleration sensor |
Detects the vertical acceleration of the rear of the body. |
| Absorber control ECU (built into front acceleration sensor RH) |
- Controls the damping force.
- When changed to diagnostic mode, indicates any malfunction by outputting DTCs (Diagnostic Trouble Codes).
- Detects the front right body vertical acceleration.
|
| Yaw rate sensor |
Detects the vehicle's longitudinal and lateral acceleration and deceleration. |
| Steering sensor |
Detects the steering direction and the angle of the steering wheel. |
| Skid control ECU (brake actuator assembly) |
- Sends the vehicle speed signal to the absorber control ECU.
- Sends the brake pedal depressed signal to the absorber control ECU.
- Makes a request for damping force control to the absorber control ECU.
|
| ECM |
- Sends the drive torque signal to the absorber control ECU.
- Sends information of drive mode selected through a drive mode select switch operation to the absorber control ECU.
|
| VGRS ECU (Front steering control ECU)*1 |
Sends the VGRS operation angle signal to the absorber control ECU. |
| Driving support ECU assembly*2 |
Sends the damping force cooperative control signal to the absorber control ECU. |
| Combination switch assembly |
Drive mode select switch |
Switches the driving mode. |
| Combination meter assembly |
Multi-information display |
Indicates the selected condition of the drive mode select switch. |