Audio Receiver Assembly Communication Stop Mode (2016 - 2017): Description

Detection Item	Symptom	Trouble Area
Audio Receiver Assembly Communication Stop Mode	Either condition is met: "Display and Navigation (AVN1)" is not displayed on the CAN Bus Check screen of the Techstream (Refer to PROBLEM SYMPTOMS TABLE (2016 - 2017) ) Communication system DTCs (DTCs that start with U) that correspond to "Audio Receiver Assembly Communication Stop Mode" in "DTC Combination Table" are output (Refer to DIAGNOSIS SYSTEM (07/2015 - 08/2016) Refer to DIAGNOSIS SYSTEM (08/2016 -) )	Radio receiver assembly branch line or connector Power source circuit of radio receiver assembly Radio receiver assembly ground circuit Radio receiver assembly