DTC C1AA0: Front Camera Module Circuit [07/2015 - ]: Procedure

1. Check if the stored DTCs are current DTCs.
2. Turn the power switch on (IG).
3. Turn the Techstream on.
4. Enter the following menus: Chassis / Front Recognition Camera / Trouble Codes
5. Check for DTCs. Refer to DTC CHECK / CLEAR [07/2015 - ]

   Result

   Result	Proceed to
   DTC C1AA0 is output.	A
   DTC C1AA0 is not output.	B

Result:  B

B 

USE SIMULATION METHOD TO CHECK 

Refer to HOW TO PROCEED WITH TROUBLESHOOTING [07/2015 - ]

Result:  A

A 

See step  2

1. Replace the forward recognition camera. Refer to REMOVAL [07/2015 - ]
2. Adjust the forward recognition camera. Refer to ADJUSTMENT [07/2015 - ]

Result:  NEXT

NEXT 

END