DTC C1AC2: Slave Module Horizontal Axis Misalignment [07/2015 - ]: Procedure

1. Check the installation condition of the blind spot monitor sensor RH. Refer to OPERATION CHECK [07/2015 - ]

   HINT: 

   Take the appropriate action in accordance with the result.

Result:  NEXT

NEXT 

See step  2

1. Install the rear bumper. Refer to INSTALLATION [07/2015 - ]
2. Perform Blind Spot Monitor Beam Axis Confirmation using the Techstream. Refer to OPERATION CHECK [07/2015 - ]

Result:  OK

OK 

END 

Result:  NG

NG 

REPLACE BLIND SPOT MONITOR SENSOR RH 

Refer to REMOVAL [07/2015 - ]