DTC C1AC2: Slave Module Horizontal Axis Misalignment [07/2015 - ]: Description
This DTC is stored when the angle of the blind spot monitor sensor RH deviates more than the allowable range from the horizontal axis.
HINT:
If drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor main switch (warning canceling switch assembly) on, the blind spot monitor system may store this DTC by mistake.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| C1AC2 | When the blind spot monitor sensor deviates 5 degrees or more from the horizontal axis when the system is activated. | Blind spot monitor sensor RH |