LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> GS 450h Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Engine Coolant Temperature Sensor >> Removal [09/2014 - ] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [09/2014 - ]: Procedure

  1. REMOVE FUEL PRESSURE SENSOR 

    (See article. Refer to REMOVAL [09/2014 - ] )

  2. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the clamp and connector.
      GTY400149Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the engine coolant temperature sensor and gasket.
      GTY400150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals