LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> LC 500h >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Dynamic Rear Steering System - Diagnostic Codes & Symptom Tests >> Dynamic Rear Steering System >> DTC U0129/41: Lost Communication with Brake System Control Module; DTC U0130/41: Lost Communication with Steering Effort Control Module; DTC U0293/41: Lost Communication with Hybrid Vehicle Control System [01/2017 - 09/2018] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0129/41: Lost Communication with Brake System Control Module; DTC U0130/41: Lost Communication with Steering Effort Control Module; DTC U0293/41: Lost Communication with Hybrid Vehicle Control System [01/2017 - 09/2018]: Description

The DRS ECU (rear steering control ECU) sends and receives data to and from the hybrid vehicle control ECU assembly, skid control ECU assembly and VGRS ECU (front steering control ECU) via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition
U0129/41 Lost Communication with Brake System Control Module All conditions are met:
  • 2 seconds or more elapse after turning the power switch on (IG).
  • The power source voltage is 10 to 16 V.
  • The signal from the skid control ECU assembly is lost for approximately 3 seconds or more.
  • Skid control ECU assembly
  • CAN communication system
Comes on Power switch on (IG) again
U0130/41 Lost Communication with Steering Effort Control Module All conditions are met:
  • 1 second or more elapses after turning the power switch on (IG).
  • The power source voltage is 10 to 16 V.
  • The signal from the VGRS ECU (front steering control ECU) is lost for approximately 3 seconds or more.
  • VGRS ECU (front steering control ECU)
  • CAN communication system
Comes on Power switch on (IG) again
U0293/41 Lost Communication with Hybrid Vehicle Control System All conditions are met:
  • 1 second or more elapses after turning the power switch on (IG).
  • The power source voltage is 10 to 16 V.
  • The signal from the hybrid vehicle control ECU assembly is lost for approximately 3 seconds or more.
  • Hybrid vehicle control ECU assembly
  • CAN communication system
Comes on Power switch on (IG) again