LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2018 >> LS 500h RWD >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Suspension Control System - Service Information >> Height Control Way >> Removal [10/2017 - 10/2023] >> Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal [10/2017 - 10/2023]: Procedure

  1. REMOVE FRONT WHEEL RH 

    Refer to REMOVAL [10/2017 - 10/2023]

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 2WD) 

    Refer to PROCEDURE - Step 18 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 18 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 18 [09/2019 - 10/2020] , or refer to PROCEDURE - Step 18 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 18 [11/2021 - 10/2022] , or refer to PROCEDURE - Step 18 [10/2022 - 10/2023]

  3. REMOVE TRANSMISSION UNDER COVER (for 2WD) 

    Refer to PROCEDURE - Step 19 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 19 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 19 [09/2019 - 10/2020] , or refer to PROCEDURE - Step 19 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 19 [11/2021 - 10/2022] , or refer to PROCEDURE - Step 19 [10/2022 - 10/2023]

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 2WD) 

    Refer to PROCEDURE - Step 20 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 20 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 20 [09/2019 - 10/2020] , or refer to PROCEDURE - Step 20 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 20 [11/2021 - 10/2022] , or refer to PROCEDURE - Step 20 [10/2022 - 10/2023]

  5. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for AWD) 

    Refer to PROCEDURE - Step 23 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 23 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 23 [09/2019 - 10/2020] , or refer to PROCEDURE - Step 23 [10/2020 - 11/2021] , or refer to PROCEDURE - Step 23 [11/2021 - 10/2022] , or refer to PROCEDURE - Step 23 [10/2022 - 10/2023]

  6. REMOVE ENGINE SIDE COVER RH (for 2WD) 
    1. Remove the 4 clips.
      GTY809786Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the claw and remove the engine side cover RH.
  7. REMOVE FRONT FENDER WHEEL OPENING MOULDING RH 
    1. Detach the 3 claws and remove the front fender wheel opening moulding RH.
      GTY793405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Thin-bladed Screwdriver Insertion Position

      HINT: 

      Insert a thin-bladed screwdriver from the vehicle side and bend the claw to remove it.

  8. REMOVE FRONT FENDER LINER RH 
    1. Remove the 11 screws, 13 clips and front fender liner RH.
      GTY808567Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      clip screw
  9. REMOVE HEIGHT CONTROL WAY 
    1. Disconnect the connector.
      GTY795218Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 No. 8 Height Control Tube
      *2 Rear No. 8 Height Control Tube
    2. Using SST, disconnect the No. 8 height control tube and rear No. 8 height control tube.
      • SST: 09730-00020 

      Refer to PRECAUTION [10/2017 - ]

    3. Remove the bolt and height control way.
      GTY799661Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals