Component Operating Range
U0074 (CASE 1 AND 9)
| Both of the following conditions are met | - |
| IG1 voltage | Higher than 10 V |
| CAN Bus | Not bus off |
U0074 (CASE 2)
| All of the following conditions are met | - |
| HV communication failure detection | Valid |
| IG1 voltage | Higher than 10 V |
| CAN controller reset due to transmission lock | Invalid |
U0074 (CASE 3 AND 4)
| Communication status with acceleration sensor (yaw rate and acceleration sensor) | Valid |
U0074 (CASE 5 AND 6)
| Communication status with yaw rate sensor (yaw rate and acceleration sensor) | Valid |
U0074 (CASE 7 AND 8)
| Communication status with steering angle sensor | Valid |
U0074 (CASE 10)
| Both of the following conditions are met | - |
| IG1 voltage | Higher than 10 V |
| CAN controller reset due to transmission lock | Invalid |
U0100 (CASE 1 AND 2)
| Communication status with ECM assembly | Valid |
U0125 (CASE 1 AND 2)
| Communication status with acceleration sensor (yaw rate and acceleration sensor) | Valid |
U0140
| Communication status with main body ECU (multiplex network body ECU) | Valid |
U0293 (CASE 1 AND 2)
| Communication status with Hybrid vehicle control ECU assembly | Valid |
U1106
| Communication status with parking brake ECU assembly | Valid |
U1107
| Communication status with certification ECU (smart key ECU assembly) | Valid |