Monitor Description
The ECM monitors the signals received from the No. 1 throttle position sensor and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the VTA1 signal of the No. 1 throttle position sensor, if these signals do not correlate, a DTC will be stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory | Note |
|---|---|---|---|---|---|---|
| P060E49 | Internal Control Module Throttle Position Performance Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE Code: P060E |
| P061E49 | Internal Control Module Brake Signal Internal Electronic Failure | Either of the following conditions is met (1 trip detection logic):
|
ECM | Comes on | DTC stored | SAE Code: P060E |