How To Proceed With Troubleshooting [09/2014 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard Voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Using the Techstream, inspect the CAN communication function to ensure there are no malfunctions in the communication system (Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] or refer to DIAGNOSTIC TROUBLE CODE CHART [10/2015 - 09/2018] or refer to DIAGNOSTIC TROUBLE CODE CHART [09/2018 - ] ).

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )

Result: 

A 

See step  4

1. Using the Techstream, inspect the LIN communication function to ensure there are no malfunctions in the communication system.

   Result

   Result	Proceed to
   No DTCs output	A
   DTCs output	B

Result: 

B 

GO TO DIAGNOSTIC TROUBLE CODE CHART 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - ] )

Result: 

A 

See step  5

Result

Result: 

B 

ADJUST, REPAIR OR REPLACE N ACCORDANCE WITH PROBLEM SYMPTOMS TABLE 

Result: 

A 

See step  6

1. Data List / Active Test (Refer to DATA LIST / ACTIVE TEST [09/2014 - ] ).
2. Terminals of ECU (Refer to TERMINALS OF ECU [09/2014 - ] ).

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

END