DTC U0122: Lost Communication with Vehicle Dynamics Control Module [09/2014 - 10/2015]: Procedure

1. Select "Bus Check" from the "System Select" (Refer to DIAGNOSIS SYSTEM [09/2014 - 10/2015] )
2. Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter" (Refer to DIAGNOSIS SYSTEM [09/2014 - 10/2015] )

   OK

   CAN communication system DTC is not output.

Result: 

OK 

USE SIMULATION METHOD TO CHECK 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] )

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM 

(Refer to DIAGNOSTIC TROUBLE CODE CHART [09/2014 - 10/2015] )