How To Proceed With Troubleshooting [09/2014 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is less than 11 V, recharge or replace the battery before proceeding.

Result

Result: 

NEXT 

See step  3

1. Using the Techstream, check if the CAN communication system is functioning normally (Refer to DIAGNOSIS SYSTEM [09/2014 - 10/2015] , or refer to DIAGNOSIS SYSTEM [10/2015 - 09/2017] , or refer to DIAGNOSIS SYSTEM [09/2017 - 09/2018] , or refer to DIAGNOSIS SYSTEM [09/2018 - ] ).

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION (HOW TO PROCEED WITH TROUBLESHOOTING) 

(Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2015] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ] )

Result: 

A 

See step  4

1. Check for DTCs (Refer to DTC CHECK / CLEAR [09/2014 - ] ).
2. Clear the DTCs (Refer to DTC CHECK / CLEAR [09/2014 - ] ).
3. Recheck for DTCs (Refer to DTC CHECK / CLEAR [09/2014 - ] ).
   1. Simulate the malfunction and check if the DTCs are output again (Refer to DTC CHECK / CLEAR [09/2014 - ] ).

   Result

   Result	Proceed to
   DTC is output	A
   DTC is not output	B
   DTCs are not output, and the malfunction cannot be simulated or checked	C

Result: 

B 

See step  9

Result: 

C 

SYMPTOM SIMULATION 

Result: 

A 

See step  5

Result

Result: 

NEXT 

See step  6

Result

Result: 

NEXT 

See step  7

Result

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

END 

Result

Result: 

NEXT 

See step  10

Result

Result: 

NEXT 

See step  11

Result

Result: 

NEXT 

END