Caution / Notice / Hint
NOTE:
- When using the Techstream with the engine switch off to troubleshoot:
Connect the Techstream to the DLC3 and turn a courtesy light switch on and off at 1.5 second intervals until communication between the Techstream and vehicle begins.
- After performing repairs, confirm that no DTCs are output again (Refer to DTC CHECK / CLEAR [09/2014 - ] ).
- When replacing the steering lock ECU (steering lock actuator assembly), registration must be performed (Refer to REGISTRATION [09/2014 - 10/2015] or refer to REGISTRATION [10/2015 - ] ).
HINT:
When all the ECUs that are connected to the LIN communication cannot communicate with the certification ECU (smart key ECU assembly), DTC B2785 is stored.