DTC B2782: Power Source Control ECU Malfunction [08/2022 - ]: Procedure
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Smart Access / Trouble Codes.
- Check for DTCs.
Result
Result Proceed to DTC B2785 is not output. A DTC B2785 is output. B
Result:
B
GO TO LIN COMMUNICATION SYSTEM (DTC B2785). Refer to DTC B2785: Communication Malfunction between ECUs Connected by LIN [08/2022 - ]
Result:
A
See step 2
- CLEAR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Smart Access / Clear DTCs.
- Clear the DTCs.
Result
Proceed to NEXT
Result:
NEXT
See step 3
- CHECK FOR DTC
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Smart Access / Trouble Codes.
- Check for DTCs.
Result
Result Proceed to DTC is output A DTC is not output B
Result:
A
REPLACE ID CODE BOX (IMMOBILISER CODE ECU). Refer to REMOVAL [08/2015 - ]
Result:
B
END