Air Conditioning Control Panel does not Operate [08/2015 - 08/2021]: Procedure

1. Disconnect the G12 air conditioning amplifier assembly connector.
2. Disconnect the T2 No. 2 air conditioning control assembly connector.
3. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   G12-13 (RLIN) - T2-6 (RLIN)	Always	Below 1 Ω
   G12-13 (RLIN) or T2-6 (RLIN) - Body ground	Always	10 kΩ or higher

Result: 

OK 

Go to AIR CONDITIONING SYSTEM 

(Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2019] , or refer to PROBLEM SYMPTOMS TABLE [08/2019 - 08/2021] )

Result: 

NG 

REPAIR OR REPLACE HARNESS OR CONNECTOR