Front Power Seat does not Operate with Front Power Seat Switch [04/2013 - ]: Procedure

1. Check that each function of the power seat operates normally by using the front power seat switch LH.

   Refer to OPERATION CHECK [04/2013 - ]

   Result

   Result	Proceed to
   All power seat functions do not operate	A
   One or more power seat functions do not operate	B

Result: 

B 

GO TO OTHER DIAGNOSIS PROCEDURE (One or more Power Seat Motors do not Operate). Refer to  One or more Power Seat Motors do not Operate [04/2013 - ]  

Result: 

A 

See step  2

1. Disconnect the b11 or b12 front power seat switch LH connectors.
2. Measure the voltage according to the value(s) in the table below.

   Standard Voltage

   Tester Connection	Condition	Specified Condition
   b11-7 (+B) - Body ground	Always	11 to 14 V
   b12-3 (IG) - Body ground	Engine switch on (IG)	11 to 14 V
   b12-3 (IG) - Body ground	Engine switch off	Below 1 V

   Result

   Proceed to
   OK
   NG

Result: 

NG 

REPAIR OR REPLACE HARNESS AND CONNECTOR 

Result: 

OK 

See step  3

1. Measure the resistance according to the value(s) in the table below.

   Standard Resistance

   Tester Connection	Condition	Specified Condition
   b11-2 (GND) - Body ground	Always	Below 1 Ω

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE FRONT POWER SEAT SWITCH LH. Refer to  REMOVAL [04/2013 - ] 

Result: 

NG 

REPAIR OR REPLACE HARNESS AND CONNECTOR